English
 |
| Quantity: | |
|---|---|
GTP-012LD Series thermally conductive gap filler are applied to fill the air
gaps between the heating elements and the heat dissipation fins or the metal base. Their
flexibility and elasticity make them suited to the coating of the very uneven surfaces.
Heat can transmit to the metal housing or dissipation plate from the separate elements or
even the entire PCB, which in effect enhances the efficiency and life-time of the
heat-generating electronic components.
Features and Benefits：
.Thermal conductivity 1.2 W/m-K
.Low Density
.Very soft & high compressibility
. Natural tacky
. Good Electrically isolating
.Excellent resiliency, tensile strength,
and abrasion resistance
Applications：
.Computer services: CPU, Heat sink,
Memory modules
.New energy automobile
.Military Electronics
. Telecom services, Wireless instruments
.Telecom services,
. Wireless instruments
.Automotive control services
Property | Data | Test Method |
Composition | Silicone elastomer | |
Color | Multi color | Visual |
Thermal conductive | 1.2W.m -1 .K -1 | ASTM D5470 |
Hardness | 5~60 Shore 00 | ASTM D2240 |
Density | 1.6g.cm -3 | ASTM D792 |
Temperature Range | -40℃～+200℃ | — |
Breakdown Voltage (V/mm) | >10000 V | ASTM D149 |
Flame Rating | UL 94 V-0 | UL 94 (UL FileE348291) |
Dielectric Constant | 4.9MHz | ASTM D150 |
Standard Sheet Size | 300*400 mm | — |
Volume Resistivity | 2.3*10 13 ohm-cm | ASTM D257 |
Tensile Strength | 35Psi | ASTM D412 |
The information and statements herein are believed to be reliable but are not to be construed as a warranty or representation for which we assume legal responsibility. Users should undertake sufficient verification and testing to determine the suitability for their own particular purpose of any information or products referred to herein.
Availability：
.0.004 inch to 0.4 inch(0.1mm to 10.0mm)
. Stand sheet size is 12＂x 16＂
.FG designates Fiberglass
.DC1 designates proprietary option eliminating tack form one side
. A is meet add addition PSA A1=one side PSA, A2=two side PSA.
Examples：
.GTP-012LD(80Shore00) =special hardness 80Shore00
. GTP-012LD-100 =0.1 inch thick material
.GTP-012LDFG-010=0.01 inch material with Fiberglass
.GTP-012LDDC1-100=0.1 inch thickness material with one side none-tacky option
.GTP-012LDA1(3M467)-100=0.1 inch thickness material with 3M467 one side
